| Penetration (25°C-100g-5s) | EN 1426 | B | | L |
| AASHTO T 49 | | A | |
| ASTM D5 | B | A | |
| IRAM 6576 | | | |
| Penetration (15°C-100g-5s) | EN 1426 | B | | L |
| Penetration 5 temperatures (IP-5T) | FD T 66-064-2015 | | | |
| Softening point (R&B) | AASHTO T 53 | B | A | |
| ASTM D36 | B | A | |
| EN 1427 | B | | L |
| IRAM 6841 | | | |
| Penetration index | EN 12591 Annex A | B | | L |
| IRAM 6835 5.1 | | | |
| Fraass breaking point | EN 12593 | B | | L |
| Dynamic viscosity | AASHTO T 202 | | A | |
| AS 2341.2 | | | |
| ASTM D2171 | B | A | |
| EN 12596 | B | | L |
| Kinematic viscosity | EN 12595 | B | | L |
| AASHTO T 201 | | A | |
| ASTM D2170 | B | A | |
| Solubility | AASHTO T 44 | B | A | |
| ASTM D2042 | B | A | |
| EN 12592 | B | | L |
| IRAM 6835 5.2 | | | |
| Flash point – COC | AASHTO T 48 | B | A | |
| ASTM D92 | B | A | |
| EN ISO 2592 | B | | L |
| IRAM IAP A65-55 | | | |
| Change of mass (RTFOT) | AASHTO T 240 | B | A | |
| ASTM D2872 | B | A | |
| EN 12607-1 | B | | L |
| IRAM 6839 | | | |
| Dynamic Shear Rheometer (DSR) | AASHTO T 315 | B | A | |
| ASTM D7175 | | A | |
| AL DSR Prüfung (BTSV) | | | L |
| EN 14770 | B | | L |
| AL DSR Prüfung (konstante Sherrate) | | | L |
| DSR: Flow curve at a range of temperatures | EN 14770 | B | | L |
| Temperature sweep (DSR) | AL DSR-Prüfung (T-Sweep) | | | |
| TL Bitumen – StB § 5.4 – EN 14770 | B | | |
| EN 14770 | | | L |
| DSR: Flow curve | EN 14770 | B | | L |
| Dynamic Shear Rheometer (DSR) | EN 14770 | B | | L |
| Total Acid Number (TAN) | ASTM D664 | | | |
| Adhesivity by water immersion test – aggregate method | EN 15626 | | | |
| Ash content | BS 2000-223 | B | | |
| Ash content | DIN 52005 | B | | |
| EN 12697-47 | | | |
| ASTM D3174 | | | |
| ASTM D3180 | | | |
| Bending Beam Rheometer | AASHTO T313 | B | A | |
| AL BBR-Prüfung | | | |
| ASTM D6648 | B | A | |
| EN 14771 | B | | L |
| Element analysis (ICP-AES) | METHOD GEOS | | | |
| Blending PMB | METHOD GEOS | | | |
| Density | EN ISO 3838 | | | |
| Relative density | AASHTO T 228 | B | A | |
| ASTM D70 | B | A | |
| EN 15326 | B | | L |
| EN ISO 3838 | B | | L |
| EN 1097-7 | B | | L |
| Density @ 15°C | ASTM D70 | B | A | |
| ASTM D4052 | | | |
| EN 15326 | B | | L |
| EN ISO 3838 | B | | L |
| EN ISO 12185 | | | |
| ASTM D70 | B | A | |
| Density @ 25°C & 15°C | ASTM D70 | B | A | |
| EN 15326 | B | | L |
| ASTM D70 | B | A | |
| EN ISO 3838 | B | | L |
| ASTM D70 | B | A | |
| Polymer dispersion | EN 13632 | B | | L |
| VOC | METHOD GEOS | | | |
| EN ISO 3405 | | | |
| Ductility | ASTM D113 | B | A | |
| DIN 52013 | | | |
| NBN T 54-208 (1971) | B | | |
| Afl. PM – Hfdst. 8 (08.36) | B | | |
| Durability index | IRAM 6835 5.3 | | | |
| Durability | NZTA T13 | | | L |
| Elastic recovery | AASHTO T301 | | A | |
| Elastic recovery | ASTM D7175 | | A | |
| Elastic recovery | EN 13398 | B | | L |
| Equiviscous temperature by DSR | prEN 15324 | | | |
| Equiviscous temperature | NEN 3945 | B | | |
| Fatigue test | RILEM TC 182 ATB | | | |
| Force ductility | AASHTO T 300 | | | |
| EN 13589 – EN 13703 | B | | L |
| H2S | IP 570 | | | |
| H2S in headspace of bitumen by Draeger tubes | METHOD GEOS | | | |
| Content of asphaltenes | DIN 51595 | B | | |
| BS 2000-IP 143 | B | | L |
| Estimating fatigue resistance of asphalt binders using the Linear Amplitude Sweep | AASHTO TP 101 | | | |
| Loss in mass after heating (LOH) | ASTM D6 | B | | |
| EN 13303 | B | | L |
| Loss on ignition | METHOD GEOS | | | |
| TTS Mastercurve | EN 14770 | B | | L |
| MSCR | AASHTO T 350 | B | A | |
| ASTM D7405 | | A | |
| AL MSCR | B | | |
| Polymer content | METHOD GEOS | | | |
| Na (ICP-AES) | METHOD GEOS | | | |
| Presence of PAH by PAH-marker | CROW Publicatie 210 § 4.2 (RAW Proef 77.2 )(2015) | B | | |
| PAH-content by HPLC (16 components, EPA)(based on NEN 6977+C1, NEN 7331/A1 §9.6) | METHOD GEOS | B | | |
| PAH-content (16 components, EPA) | NEN 7331/A1 § 9.6 | | | |
| Pressure Ageing Vessel (PAV) | AASHTO R28 | B | A | |
| ASTM D6521 | B | A | |
| EN 14769 | B | | L |
| Pendulum test | EN 13588 | B | | L |
| Determination Performance Binder Grade and Continuous Performance Grade | AASHTO M320 | | | |
| Plasticity index | EN 14023 | B | | L |
| Polymer content | METHOD GEOS | | | |
| LPC n° 71 | | | |
| IR fingerprint | METHOD GEOS | | | |
| Polymer type | METHOD GEOS | | | |
| Flash point – PMCC | ASTM D93 | B | | |
| EN ISO 2719 | B | | L |
| Perceptible properties | EN 1425 | | | |
| Change of mass (RFT) | EN 12607-3 | | | L |
| Total sulfur | ASTM D2622 | | | |
| Salts in bitumen | METHOD GEOS | | | |
| Salt content | CEN TC336 WG2 | | | |
| SARA analysis | ASTM D4124 | | | |
| IP 469 | | | |
| SARA analysis (after removal of Asphaltenes) | IP 469 | | | |
| Spot test | AASHTO T 102 | | | |
| Spot test (Ensayo de la mancha) | IRAM 6594 | | | |
| Staining tendency | EN 13301 | B | | L |
| Storage stability | ASTM D7173 | | | |
| ASTM D5976 | | | |
| EN 13399 | B | | |
| Susceptibility index | METHOD GEOS | | | |
| Change of mass (TFOT) | AASHTO T 179 | | A | |
| ASTM D1754 | B | A | |
| EN 12607-2 | B | | L |
| Fuming loss | METHOD GEOS | | | |
| Tensile properties | EN 13587 | B | | |
| Chromaticity co-ordinates and luminance factor | EN 1871 (Annex A) | | | |
| Verifying of capillary | METHOD Geos | B | | |
| Dynamic viscosity | ASTM D4402 | B | A | |
| EN 13302 | B | | L |
| Dynamic viscosity (Temperature sweep) | EN 13302 | B | | L |
| Viscosity – Cone and plate | EN 13702 | B | | L |
| Dynamic viscosity @ 60°C | ASTM D4402 | B | A | |
| Visual characteristics | METHOD GEOS | | | |
| Paraffin by distillation | EN 12606-1 | B | | L |
| Paraffin by extraction | EN 12606-2 | B | | L |
| Zero Shear Viscosity | CEN/TS 15325 | | | | |
Nederlands (België) 
English (UK)